Checking The Print Queue - AGFA Drystar 5301 User Manual

Checking the print queue

You can always check the status of the print jobs on a connected remote access
PC via the operator menu.
If jobs have been transmitted from the network to the printer, they are put in
the print queue on a first in, first out schedule. New jobs that are added to the
queue get the 'waiting' status.
As soon as the last film of a job is ejected in the output tray, the next job that
has been calculated will be put in printing status.
Drystar 5301, Drystar 5302 | Basic Operation (operator mode) | 73
Note: Keep in mind that one print job can hold several films to
be printed. In accordance with the acquisition modality used,
and the actual settings, films can be grouped in a folder to be
submitted as one print job. Refer to the User manual of the
acquisition modality for more information.
2831E EN 20161128 1410