S-Bracket (Spdif) Connector: Jsp1 (Optional); Front Panel Connectors: Jfp1 & Jfp2; Front Usb Connectors: Jusb1 & Jusb2 (Optional); Front Panel Audio Connector: Jaud1 - MSI MS-7043 User Manual

®
D-Bracket 2 Connector: JDB1 (Optional)
The mainboard comes with a JDB1 connector for you to connect to D -Bracket
®
D-Bracket 2 is a USB Bracket that supports both USB1.1 & 2.0 spec. It integrates
four LEDs and allows users to identify system problems through 16 various
combinations of LED signals.

S-Bracket (SPDIF) Connector: JSP1 (Optional)

The connector allows you to connect an S-Bracket for Sony & Philips Digital Interface
(SPDIF). The S-Bracket offers 2 SPDIF jacks for digital audio transmission (one for
optical fiber connection and the other for coaxial), and 2 analog Line-Out jacks for
4-channel audio output.
To attach the fiber-optic cable to optical SPDIF jack, you need to remove the plug
from the jack first. The two SPDIF jacks support SPDIF output only.
Front Panel Connectors: JFP1 & JFP2
The mainboard provides two front panel connectors for electrical
connection to the front panel switches and LEDs. The JFP1 is
compliant with Intel Front Panel I/O Connectivity Design Guide.
Front USB Connectors: JUSB1 & JUSB2 (Optional)
The mainboard provides two USB 2.0 pin headers JUSB1 & JUSB2 that are compliant
®
with Intel I/O Connectivity Design Guide. USB 2.0 technology increases data
transfer rate up to a maximum throughput of 480Mbps, which is 40 times faster
than USB 1.1, and is ideal for connecting high-speed USB interface peripherals
such as USB HDD, digital cameras, MP3 players, printers, modems and the like.

Front Panel Audio Connector: JAUD1

The front panel audio connector allows you to connect to the front panel audio
and is compliant with Intel
MSI Reminds You...
If you do not want to connect to the front audio header, pins 5 & 6, 9 & 10 have to
be jumpered in order to have signal output directed to the rear audio ports. Otherwise, the Line-Out
connector on the back panel will not function.
®
Front Panel I/O Connectivity Design Guide.
12
DBR4
®
2.
DBR3
DBR2
DBR1
2
1
DBG1
DBG2
DBG3
DBG4
SOUT-R
SPDFO
VDD3
2
1
VCC5
GND
LFE-OUT
JFP1 JFP2
Power Power
Speaker
LED Switch
2
2 10
1
9
1
Power
HDD Reset
LED
LED Switch
GND
USB1+
USBOC
USB1-
VCC
2
1
VCC
USB0-
USB0+
GND
AUD_VCC
AUD_GND
AUD_RET_R
KEY
AUD_RET_L
2 10
9
1
AUD_FPOUT_L
HP_ON
AUD_FPOUT_R
AUD_MIC
AUD_MIC_BIAS
NC
10
9
SOUT-L
GND
12
11
GND
CET-OUT
8
7
10
9