Pc Health Status; Frequency/V Oltage Control - MSI E7210 Master-FARM User Manual

MS-9149 ATX Server Board

PC Health Status

Th is set up screen appears only when the mBMC chip (for Server
Management) is not integrated on the mainboard.
This section shows the status of yo ur CPU, fan, overall sy stem status,
etc. Monitor function is available only if there is hardware monitoring mecha-
nism on board.
Shutdown Temperature
This op tion is for setting the s hutdown temp erature level for the pro cessor.
When the processor reaches the temperature you set, the system will be shut
0
down. Options: Disabl ed, 80 C/175
Voltage 0, VCC3, VCCP, VTT DDR, VCC DDR, 12V, VCC5V, Current CPU/
System Temp, Current CPU FAN1 Speed, Current SYS FAN1/2/3/4/5 Speed
Thes e items display the cu rrent st atus of all of the mon itored hardware de-
vices/components such as CPU voltages, temperatures and all fans' speeds.
3-26
0 0 0 0 0
F, 85 C/1183 F, 90 C/191 F.
Frequency/Voltage Control
Use this menu to specify your settings for frequency/voltage control.
Auto Detect PCI Clk
This item is used to auto detect the PCI slots. When set to Enabled, the
system will remove (turn off) clocks from empty PCI slots to minimize the
electromagnetic interference (EMI). Settings: Enabled, Disabled.
Spread Spectrum
When the motherboard clock generator pulses, the extreme values (spikes) of
the pulses creates EMI (Electromagnetic Interference). The Spread Spectrum
function reduces the EMI generated by modulating the pulses so that the spikes
of the pulses are reduced to flatter curves. If you do not have any EMI problem,
leav e the s etting at Disab led for optimal syst em stability and performance.
But if you are p lagued by EM I, set ting t o Enab led fo r EMI reduct ion. Re-
member to disable Spread Spectrum if you are o verclockin g because even a
slight jitter can in troduce a t emporary boo st in clockspeed which may just
cause your overclocked processor to lock up.
BIOS Setup
3-27