Standard Cmos Features - MSI E7210 Master-FARM User Manual

MS-9149 ATX Server Board

Standard CMOS Features

The items inside St andard CMOS Feat ures menu are d ivided into 10
categories. Each categ ory includes no ne, one or more setup items. Use the
arrow keys to highligh t the item you want to modify and use the <PgUp> or
<PgDn> keys to switch to the value you prefer.
Date (mm:dd:yy)
This allows you to set the system to the date that you want (usually the current
date). The format is <day><mont h> <dat e> <year>.
da y Day o f the week, from Su n to Sat, determin ed by
BIOS. Read-on ly.
month The mo nth from Jan. throug h Dec.
date The d ate from 1 to 31 can be keyed by nu meric
function keys.
year The year can be adjusted by users.
Ti me (hh:mm:s s)
This allows y ou t o set the system time th at yo u wan t (us ually the current
time). The time format is <ho ur> <minute> <seco nd>.
IDE Primary/Secondary Master/ Slave
Press PgUp/<+> or PgDn/<-> to s elect Manual, Non e, Auto type. Note that
the specifications of your drive must match with the drive table. The hard disk
will n ot work pro perly if yo u enter imp roper information for this catego ry. If
3-6
your hard disk drive ty pe is not mat ched o r listed, you can u se Manu al t o
define your own drive type man ually.
If you select Manual, related information is asked to be entered to the follow-
ing items. Enter the informat ion directly from t he keyboard. This information
should b e provided in the documentation from your h ard disk vendo r or the
system man ufacturer.
If the controller of HDD interface is SCSI, the selection shall be "None". If
the con troller of HDD interface is CD-ROM, the selection shall be "None".
Access Mode The settings are CHS, LBA, Large, Aut o.
Capacity The formatt ed size of the storage device.
Cylinder Numb er of cylind ers.
Head Numb er of heads.
Precomp Write precompensation.
Landi ng Zone Cylinder location o f the landin g zone.
Sector Number of sectors.
Dri ve A/B
This it em allows you to set t he t ype o f floppy driv es installed. Av ailable
options are None, 360K, 5.25 in., 1.2M, 5.25 in., 720K, 3.5 in., 1.44M, 3.5 in.,
2.88M, 3.5 in.
Halt On
The setting determin es whether the system will stop if an error is detected at
boot. Available options are:
All Errors The system stops when any error is detected.
Disabled The system doesn't stop for any detected error.
All, But Keyboard The system doesn't stop for a keyboard error.
All, But Diskette The system doesn't stop for a disk error.
All, But Disk/Key The system doesn't stop for either a disk or a key-
board error.
Base/Extended/ Total Memory
The three items s how the memory status of the sys tem. (read only)
BIOS Setup
3-7