Empire Comfort Systems DVCT36CBP Installation Instructions Manual page 11

3. Remove burner base. See Figure 8.
4. Remove Blower Brackets by taking out (6) screws each. See
Figure 9.
5. Place Blower onto Blower Brackets. See Figure 10.
.
38745-4-0319
BLOWER INSTALLATION (CONT'D)
Figure 8
Figure 9
Figure 10
6. Bend tab as shown in Figure 11 and secure with
(2) screws.
HAND BEND
TAB INWARD
HAND BEND
TAB INWARD
7. Remove protective connectors on Wire Assembly from
fireplace and discard. Connect Wire Harness to both blowers
and the other end to the Wire Assembly supplied with the
fireplace. See Figure 12.
TO WIRE ASSEMBLY
(MODULE)
TO WIRE ASSEMBLY
(MODULE)
8. Replace Blower Bracket (w/ blowers attached) with (6)
screws each. See Figure 13.
9. Replace Glass Frame, Screen Barrier, and liners removed in
Step 1, Figure 6.
Figure 11
Figure 12
Figure 13
Page 11