MSI 915GLM4-F User Manual page 48

Setting options: [Enabled], [Disabled].
Onboard Audio Controller
This item is used to enable or disable the onboard Azalia (Audio Codec) controller.
Selecting [Enabled] allows the mainboard to enable the onboard Azalia controller.
Disable the function if you want to use other controller cards to connect an
audio device. Settings: [Disabled] and [Enabled].
Onboard Audio Mode
Set this option to [Azalia] or [AC97] to select the front panel audio function
according to the case you purchased,
IDE Devices Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
PCI IDE BusM aster
Set this option to [Enabled] to specify that the IDE controller on the PCI local
bus has bus mastering capability. Settings options: [Disabled], [Enabled].
I/O Devices Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
COM Port 1/2
These items specify the base I/O port addresses of the onboard Serial Port
1 (COM A) / Serial Port 2 (COM B). Selecting [Auto] allows AMIBIOS to
automatically determine the correct base I/O port address. Settings: [3F8/
IRQ4], [2F8/IRQ3], [3E8/IRQ4], [2E8/IRQ3] and [Disabled].
COM Port 2 M ode
This setting allows you to specify the operation mode for serial port 2.
Setting options: [IrDA], [ASKIR], [Disabled].
[Disabled]
[IrDA]
[ASKIR]
Parallel Port
RS-232C Serial Port
IrDA-compliant Serial Infrared Port
Amplitude Shift Keyed Infrared Port
BIOS Setup
3-13