Table of Contents
Advertisement
M S-7133 M -ATX M ainboard
CPU, Heatsink & Fan Installation
W hen you are installing the CPU, make sure the CPU has a heat
sink/ cooler fan attached on the top to prevent overheating. If you do
not have the heat sink/cooler fan, contact your dealer to purchase and install
them before turning on the computer. Meanwhile, do not forget to apply some
silicon heat transfer compound on CPU before installing the heat sink/cooler
fan for better heatsinking.
Follow the steps below to install the CPU & cooling fan correctly. W rong
installation will cause the damage of your CPU & mainboard.
1. The CPU socket has a plastic
cap on it to protect the con-
tac t f rom damage. Always
cover it to protect the socket
pin until you are going to in-
stall the CPU.
3. The pins of socket reveal.
2-4
2. Remove the cap from lever hinge
side (as the arrow shows).
4. Open the load lever.
Hide quick links:
Advertisement
Table of Contents
