D-Led™ & D-Bracket - MSI 694T Pro User Manual

Chapter 1
D-LED™ & D-Bracket™
The D-LED™ uses graphic signal display to help
users understand their system. Four LEDs embedded in
the mainboard provide up to 16 combinations of signals to
debug the system. The 4 LEDs can debug all problems that
fail the system, such as VGA, RAM or other failures. This
special feature is very useful for the overclocking users.
These users can use the feature to detect if there are any
problems or failures.
If your motherboard installs an optional D-Bracket™ which also
integrates four Diagnostic LEDs, definitions of the LED signals are the same
as D-LED™ as shown below.
Red
D-LED
1 2 3 4
Green
D-Bracket
System Power ON
1 2
- The D-LED will hang here if the processor is damaged or
3 4
not installed properly.
Early Chipset Initialization
Memory Detection Test
- Testing onboard memory size. The D-LED will hang if
the memory module is damaged or not installed properly.
Decompressing BIOS image to RAM for fast booting.
Initializing Keyboard Controller.
Testing VGA BIOS
- This will start writing VGA sign-on message to the screen.
Description
1-10
1
2
3
4
Diagnostic LED