Installing Dimm Modules; Dimm Module Combination - MSI 650GLMS User Manual

650GLMS Micro ATX Mainboard

DIMM Module Combination

At least one DIMM module should be installed on the motherboard.
Memory modules can be installed on the slots in any order. The single-/
double-sided memory modules that each DIMM slot supports are listed as
below:
Slot
DIMM 1
(Bank 0 & 1)
DIMM 2
(Bank 2 & 3)
Maximum System Memory Supported
S: Single Side

Installing DIMM Modules

1. The DIMM slot has 2 Notch Keys "VOLT and DRAM", so the DIMM
memory module can only fit in one direction.
2. Insert the DIMM memory module vertically into the DIMM slot. Then
push it in.
3. The plastic clip at each side of the DIMM slot will automatically close.
2-8
Memory Module
S/D
S/D
D: Double Side
Notch
Volt
Total Memory
64MB~1GB
64MB~1GB
64MB~2GB