Dimm Module Combination; Installing Dimm Modules - MSI MD-3000 User Manual

DIMM Module Combination

To operate properly, at least one DIMM module must be installed. Memory
modules can be installed on the slots in any order. You can install either single-
or double-sided modules to meet your own needs.
Memory modules can be installed in any combination as follows:
Slot
DIMM 1
(Bank 0 & Bank 1)
DIMM 2
(Bank 2 & Bank 3)
Maximum System Memory Supported
S: Single Side

Installing DIMM Modules

The DIMM slot has 2 Notch Keys "VOLT and DRAM". The module will
only fit in the right orientation.
1.
Insert the DIMM memory module vertically into the DIMM slot. Then push
it in.
DRAM
2.
The plastic clip at each side of the DIMM slot will automatically close.
Memory Module Total Memory
S/D 32MB~1GB
S/D 32MB~1GB
32MB~2GB
D: Double Side
notch notch
VOLT
2-5
Hardware Setup