Dimm Module Combination; Installing Dimm Modules - MSI 845G Max Manual

Chapter 2

DIMM Module Combination

Install at least one DIMM module on the slots. You can install either
single- or double-sided modules to meet your own needs.
®
Intel 82845G chipset supports a maximum of 4 memory banks. DIMM 1
alone occupies two memory banks; the other two banks are shared by DIMM
2 & DIMM 3. Therefore, you must follow the table below to install memory
modules:
Slot
DIMM 1
DIMM 2
DIMM 3
Total Memory
S: Single Side

Installing DIMM Modules

The DDR DIMM has only one notch on the center of the module. The
module will only fit in the right orientation.
1.
Insert the DIMM memory module vertically into the DIMM slot. Then push
it in.
2.
The plastic clip at each side of the DIMM slot will automatically close.
1 2
S/D S/D
D
D
D: Double Side
Volt
2-6
Combination
3 4
S/D S/D
S
S
64MB ~ 2GB
notch
5
S/D
S
S