MSI RG-54G3 User Manual page 56

Wireless 802.11b/g broadband router

Hide thumbs Also See for RG-54G3:

Table of Contents

6. The TCP/IP protocol shall be listed in the Network window. Click OK to complete the install procedure and

restart your PC to enable the TCP/IP protocol.

A.2 Set TCP/IP Protocol for Working with NAT Router

1. Click Start button and choose Settings, then click Control Panel.

2. Double click Network icon. Select the TCP/IP line that has been associated to your network card in the

Configuration tab of the Network window.

3. Click Properties button to set the TCP/IP protocol for this NAT Router.

4. Now, you have two setting methods:

Table of Contents