Table of Contents
Advertisement
4.
Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The most common MTU value is
1492.
5.
Connection Control:There are 3 modes to select:
Connect-on-demand:The device will
Auto-Reconnect(Always-on):The device will link upw with ISP until the connection is established.
Manually:The device will not make the link until someone clicks the connect-button in the Staus-page.
4.3.1.5 PPTP
1.
My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned
to you.
2.
Server IP Address: the IP address of the PPTP server.
3.
PPTP Account and Password: the account and password your ISP assigned to you. If you don't
want to change the password, keep it empty.
3.
Connection ID: optional. Input the connection ID if your ISP requires it.
4.
Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set it to zero or
enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will
connect to ISP automatically, after system is restarted or connection is dropped.
5.
Connection Control:There are 3 modes to select:
Connect-on-demand:The device will
Auto-Reconnect(Always-on):The device will link upw with ISP until the connection is established.
Manually:The device will not make the link until someone clicks the connect-button in the Staus-page.
link up with ISP when the clients send outgoing packets.
link up with ISP when the clients send outgoing packets.
13
Advertisement
Table of Contents
