Table of Contents
Advertisement
Wireless settings allow you to set the wireless configuration items.
1. Network ID (SSID): Network ID is used for identifying the Wireless LAN (WLAN). Client stations can roam
freely over this product and other Access Points that have the same Network ID. (The factory setting is
"default")
2. Channel: The radio channel number. The permissible channels depend on the Regulatory Domain.
The factory setting is as follow: channel 6 for North America; channel 7 for European (ETSI); channel 7 for
Japan.
3. WEP Security: Select the data privacy algorithm you want. Enabling the security can protect your data while it
is transferred from one station to another. The standardized IEEE 802.11 WEP (128 or 64-bit) is used here.
4. WEP Key 1, 2, 3 & 4: When you enable the 128 or 64 bit WEP key security, please select one WEP key to be
used and input 26 or 10 hexadecimal (0, 1, 2...8, 9, A, B...F) digits.
5. Pass-phrase Generator: Since hexadecimal characters are not easily
remembered, this device offers a conversion utility to convert a simple
word or phrase into hex.
6. 802.1X Setting
802.1X
Check Box was used to switch the function of the 802.1X. When the 802.1X function is enabled, the Wireless user
must authenticate to this router first to use the Network service.
RADIUS Server
IP address or the 802.1X server's domain-name.
RADIUS Shared Key
Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the
RADIUS server.
16
Advertisement
Table of Contents
