Table of Contents
Advertisement
4.3.3 WDS
The Wireless Distribution System (WDS) supports peer-to-peer AP communication. Select
Enable to allow Bridge (WDS) mode between routers or Disable to block communication
between routers.
To enable WDS, set the Wireless Bridging (WDS) function to Enable. Enter the Wireless MAC
address of the router to communicate with in the form of two characters separated by a colon and
click Save.
4.3.4 Dynamic DNS
To host your server on a changing IP address, you have to use dynamic domain name service (DDNS).
So that anyone wishing to reach your host only needs to know the name of it. Dynamic DNS will map the name of
your host to your current IP address, which changes each time you connect your Internet service provider.
Before you enable Dynamic DNS, you need to register an account on one of these Dynamic DNS servers that we list
in provider field.
To enable Dynamic DNS click the check box next to Enable in the DDNS field.
Next you can enter the appropriate information about your Dynamic DNS Server.
18
Advertisement
Table of Contents
