Table of Contents
Advertisement
MAC address of the client you select to the ID selected in the "ID" Combobox.
Previous page and Next Page
4.4.3 Packet Filtering
Packet Filter enables you to control what packets are allowed to pass the router. Outbound filter applies on all
outbound packets. However, Inbound filter applies on packets that destined to Virtual Servers or DMZ host only. You
can select one of the two filtering policies:
1. Allow all to pass except those match the specified rules
2. Deny all to pass except those match the specified rules
You can specify 8 rules for each direction: inbound or outbound. For each rule, you can define the following:
Source IP address
Source port address
Destination IP address
Destination port address
Protocol: TCP or UDP or both.
Use Rule#
To make this setup page simple and clear, we have divided the "Control table"
into several pages. You can use these buttons to navigate to different pages.
24
Advertisement
Table of Contents
