Table of Contents
Advertisement
SEL1224G
10. Align the plane mirror with the center projected image on the screen, and confirm again that the reflected light illuminates the center of the
lens to be tested. If the reflected light position is deviated, re-adjust the lens projector position.
11. Select "Open" from the iris selection menu, and click [Iris].
Iris setting: Open
12. Rotate the zooming ring of the lens to be tested, set the zoom position.
Note 2: This lens is not power zoom, do not use the following zoom operation.
Zoom operation
13. Select "∞" from the focus selection menu.
Focus setting:
5-9
Advertisement
Table of Contents
