Table of Contents
Advertisement
Note: Follow the assembly procedure in the numerical order given.
2-3-2. CAM TUBE
4 Apply grease.
(total five position)
G-48
1 slit tube service assy
3 Apply grease.
(total five position)
G-116
rear (mount) side
front (lens) side
4 Apply grease.
rear (mount) side
front (lens) side
9 two vertical slit tube pieces
Note: When replacing the vertical slit tube piece,
choose parts that do not cause backlash
and confirm that movement is smooth.
2 Apply anti-diffusion agent.
A-20
3 Apply grease.
(total two position)
(total three position)
G-116
G-48
6 Apply grease.
(total fourteen position)
G-116
5 cam tube
0 two screws
(piece BT2.0
0 two screws
(piece BT2.0
4.5BNI)
4 Apply grease.
(total two position)
G-48
3 Apply grease.
(total two position)
G-116
4 Apply grease.
(total two position)
G-48
8 Align ditch with slider,
and install cam tube.
9 two vertical slit tube pieces
Note: When replacing the vertical slit tube piece,
4.5BNI)
2-15
7 Match the slider with the
position shown in the figure.
ditch
rear (mount) side
choose parts that do not cause backlash
and confirm that movement is smooth.
9 two vertical slit tube pieces
Note: When replacing the vertical slit tube piece,
choose parts that do not cause backlash
and confirm that movement is smooth.
0 two screws
(piece BT2.0
SEL1224G
ditch
front (lens) side
4.5BNI)
Advertisement
Table of Contents
