Polycom VVX 500 Training Manual page 14

Call Park
Put A Call Into A Call Park
Step 1: Press Transfer
Step 2: Dial the Call Park Extension
Step 3: Press Send
**Please note, transferring to call parks must be done using a blind transfer
Retrieve A Call From A Call Park
Step 1: Dial the call park extension
Step 2: Press Send or Dial
**If the call park is programmed as a speed dial on your phone you can simply click the blinking light next to the call park speed dial
Multicast Paging
Step 1: Touch the Paging Touch Key
Step 2: Touch the group that you would like to send a page to
Step 3: Touch the Page Touch Key and begin speaking
Intercom
Step 1: Dial *76 and the extension that you would like to intercom
Step 2: Touch the green phone Touch Key
– this will send a page to all multicast enabled phones at your location only
14