Tripp Lite BP240V65 Owner's Manual page 67

Extended-run battery cabinet
Table of Contents

Advertisement

Available languages

Available languages

7. Specifications
7.1 Battery Cabinet Specifications
(DC Nominal Voltage: ± 120V DC, 240V DC)
Battery Pack
Dimension
W × D × H
Weight
Breaker
Fuse
*Models with the –NIB suffix do not include internal batteries, so their total weight varies based on batteries installed by the end user.
8. Storage
Storage
The battery cabinet must be stored in a clean, secure environment with a temperature less than 104°F (40°C) and a relative
humidity less than 90% (non-condensing). Store the battery cabinet in its original shipping container if possible. Charge
the batteries for at least 24 hours prior to use. Do not rely on the battery cabinet to provide backup power to connected
equipment until the batteries are fully charged.
Note: If the UPS system remains off for an extended period of time, it should be turned on periodically to allow the batteries
to recharge. The UPS system should be turned on and the batteries should be recharged at least one uninterrupted 24-hour
period every 3 months. Failure to recharge the batteries periodically may cause irreversible battery damage.
9. Service and Warranty
Service
Your Tripp Lite product is covered by the warranty described in this manual. A variety of Extended Warranty and On-Site Service Programs are
also available from Tripp Lite. For more information on service, visit tripplite.com/support. Before returning your product for service, follow
these steps:
1. Review the installation and operation procedures in this manual to ensure that the service problem does not originate from a misreading
of the instructions.
2. If the problem continues, do not contact or return the product to the dealer. Instead, visit tripplite.com/support.
3. If the problem requires service, visit tripplite.com/support and click the Product Returns link. From here you can request a Returned
Material Authorization (RMA) number, which is required for service. This simple on-line form will ask for your unit's model and serial
numbers, along with other general purchaser information. The RMA number, along with shipping instructions will be emailed to you. Any
damages (direct, indirect, special or consequential) to the product incurred during shipment to Tripp Lite or an authorized Tripp Lite service
center are not covered under warranty. Products shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation
charges prepaid. Mark the RMA number on the outside of the package. If the product is within its warranty period, enclose a copy of your
sales receipt. Return the product for service using an insured carrier to the address given to you when you request the RMA.
BP240V65 (-NIB)
BP240V100 (-NIB)
31.5 x 35.4 x 47.2 in.
(800 x 900 x 1200 mm)
608 lb. (275.8 kg)*
930 lb. (421.8 kg)*
1x 250A
2x 400A
BP240V65L (-NIB)
1083 lb. (491.2 kg)*
67
BP240V100L (-NIB)
31.5 x 43.3 x 63 in.
(800 x 1100 x 1600 mm)
1637 lb. (742.5 kg)*
1x 600A
4x 400A

Advertisement

Table of Contents
loading

Table of Contents