Tripp Lite BP240V65 Owner's Manual page 45

5. Installation
11. Connect the cables from battery group 1 battery 1+ to BAT+ bus bar, battery 10- to BATN bus bar, battery 11+ to BATN
bus bar, battery 20- to BAT- bus bar and the layer connect cables. Connect battery group 2 battery 21+ to BAT+ bus bar,
battery 30- to BATN bus bar, battery 31+ to BATN bus bar, battery 40- to BAT- copper bar and the layer connect cables
(Figure 5-42: Model BP240V65L-NIB or Figure 5-43: Model BP240V100L and Figure 5-44).
Notes:
• Use the wiring schematics as reference
for the following assemblies:
Use Figure 5-26 for BP240V65L-NIB
Use Figure 5-27 for BP240V100L-NIB
• This manual may be downloaded in color
at tripplite.com, which shows the cables
in corresponding colors:
Red = Positive
Blue = Center Tap
Black = Negative
Figure 5-41B
Figure 5-42: Model BP240V65L-NIB
45