Magnet Mount
The optional magnet lets you temporarily mount the GPS module on any
ferrous metal surface, such as a car roof.
Under side view showing where to place the magnet.
To use the magnet, simply peel the backing off the magnet's adhesive
coating and press the magnet to the bottom of the antenna housing. The
module is ready for use.
Pole Mount
The GPS module attaches to the optional pole mount adapter with the
supplied 4 mm screws. You can route the cable through the notch in the
module housing and down the side of the pole. Or, you can pass it down
through the pole mount adapter and run the cable inside the pole. The 1"-
14 threads on the pole mount adapter fit a standard marine antenna
mounting pole.
Pole Mount.
Power Connections
The display unit that you will use with the GPS module came with a
power/data cable that splits into three branches, each with several ex-
5