Navigate To Cursor Position On Map - Lowrance iFINDER Expedition C Operation Instructions Manual

To cancel navigation to MOB, press |↓ to
MENU C N
ANCEL AVIGA-
| |← to | . The iFINDER stops showing navigation in-
ENT Y ENT
TION ES
formation.

Navigate to Cursor Position on Map

The command navigates to the current cursor position on
G T C
O O URSOR
the map. It is a quick and handy way to navigate to anything you can
see on the map display.
1. Use the cursor with the zoom in and zoom out keys to maneuver
around the map until you find a location you would like to visit.
2. Center the cursor over the location to select it. See the example be-
low. Many map items such as waypoints, Points of Interest, towns, etc.,
can be selected and appear highlighted with a pop-up box. Other items,
like a river or a street intersection, will not appear highlighted, but the
cursor will take you to those locations just the same.
Navigate to cursor. In this example, the cursor
crosshairs are centered on Oologah, Oklahoma.
3. Press | and the iFINDER will begin navigating to the cur-
MENU ENT
sor location.
The Map Page will display a course line from your current position to
the cursor position. The Navigation Page displays a compass rose
showing navigation information to your destination. See the following
examples.
34