Korg iM1 Owner's Manual page 30

VDF EG
VDF EG SELECT
Use this function to determine whether VDF EG1 or the VDF
EG2 will be shown in the active editing display
VDF EG
Modify the shape of the VDF EG by simply dragging the
points of the graphic envelope display.
VDA EG
VDA EG SELECT
Use this function to determine whether VDA EG1 or the VDA
EG2 will be shown in the active editing display.
VDA EG
Modify the shape of the VDA EG by simply dragging the
points of the graphic envelope display.
INSERT FX
FX1/FX2 ....................................................................................... [OFF, ON]
Use these switches to turn each Insert effect On or Off
FX1/FX2 EFFECT TYPE............................. [No Effect, Reverb...Delay/Tremolo]
Tap here to choose the Insert effect type.
Available Parameters by Mode
FX1/FX2 DRY/WET ......................................................[DRY, 001...099, WET]
This parameter specifies the wet/dry mix between the origi-
nal signal and the effect output.
If you're using the composite effect (Delay/Hall etc.) as
an Insert effect, and if the "DRY/WET" values differ
between Delay and Hall, the Delay value is shown here.
If you've selected a composite effect (such as Delay/Hall
or Delay/Chorus) as an Insert effect, editing "DRY/
WET" in the EASY page will set the "DRY/WET" values
of both effects to the same value.
30