Korg iM1 Owner's Manual page 26

Table of Contents

Advertisement

MASTER FX
ROUTING TYPE ............................................................... [SERIAL, PARALLEL]
This parameter determines how the two Master effects are
routed.
SERIAL sends the output of one Master effect to the input of
the other Master effect.
PARALLEL allows the two Master effects to operate indepen-
dently, side by side.
FX 1/FX 2 ..................................................................................... [OFF, ON]
Each Master effect can be turned on or off individually
PAN ON/OFF.................................................................................. [OFF, ON]
This parameter switches the pan On and Off.
If this setting is OFF, the signals will not be sent.
PAN ............................................................................... [L50...C00...R50]
Panning specifies the position in the stereo field (pan) of the
Master effect.
FX 1/FX 2
EFFECT TYPE ......................................... [No Effect, Reverb...Delay/Tremolo]
Tap here to select the Master effect type, including No Effect.
Effect Parameters
Each Master effect type will have its own specific set of
adjustable parameters.
Available Parameters by Mode
Refer to M1 owner's manual PDF, page 36 "3 - Effect parame-
ters"
For details on the other effect parameters, refer to the
original M1 owner's manual PDF which is available on
the Web. Refer to M1 owner's manual PDF, page 36 "3 -
Effect parameters"
Compressor
This effect compresses the input signal, making it more con-
sistent. It is particularly good when applied to instruments
such as guitar, piano, and drums.
Left
Right
ATTACK ................................................................................ [000...500ms]
Adjusts the strength of the attack.
SENSITIVITY ................................................................................. [00...99]
Adjusts the sensitivity of the compressor.
OUT LEVEL................................................................................ [000...100]
Adjusts the output level of the compressor.
26
WET / DRY
Compressor
OUT LEVEL
Envelope - Control
Envelope - Control
OUT LEVEL
Compressor
WET / DRY

Advertisement

Table of Contents
loading

Table of Contents