Korg iM1 Owner's Manual page 57

MIDI SETTING
MIDI
BLUETOOTH MIDI ........................................................................ [ (Search)]
When you press the Search button, the detectable Bluetooth
MIDI devices will be searched.
GLOBAL MIDI CHANNEL ..................................................................[01...16]
This parameter is used to designate the global MIDI channel.
The global MIDI channel is used for several purposes. In
Combination mode, it's used as the channel for changing
from one Combi to another, and for controlling the master
effects (the rotary speed when when "EFFECT TYPE" is
Rotary Speaker page 27). In Multi mode, it's used as the chan-
nel for controlling the Master effects. In Program mode, it's
used as the channel that will play the Program and for con-
trolling the Insert effects (the rotary speed when "EFFECT
TYPE" is Rotary Speaker page 27).
GLOBAL PITCHBEND
GLOBAL PITCHBEND......................................................... [DISABLE, ENABLE]
The Pitch Bend range can be individually stored with each
Program; the Global Pitchbend parameter will override these
individual settings
DISABLE: The individual Program parameter CONTROL
page PITCHBEND settings in each mode will be used.
Available Parameters by Mode
ENABLE: The RANGE setting set in the following parameter
will be used for every Program in every mode.
RANGE .................................................................................... [–12...+12]
This parameter sets the Global Pitchbend range. If "GLOBAL
PITCHBEND" is set to ENABLE, this setting will be used for
every Program in every mode.
MIDI FILTER
MIDI Filtering can determine which MIDI messages are
received by the Program.
Activate the MIDI filter by turning it on (lit) to prevent the
specific type of message from being received.
CONTROL CHANGE FILTER ................................................................[OFF, ON]
OFF (dark): Control Change messages are received.
ON (lit): Control Change messages are not received (filtered).
COMBI/PROG CHANGE FILTER ..........................................................[OFF, ON]
OFF (dark): Program Change messages are received.
ON (lit): Program Change messages are not received (fil-
tered).
AFTER TOUCH FILTER ......................................................................[OFF, ON]
OFF (dark): Aftertouch messages are received.
ON (lit): Aftertouch messages are not received (filtered).
57