Table of Contents
Advertisement
21 THE NETVIEWER SOFTWARE
This section provides instructions for installing and using the NetViewer, which is included
with the DXR 43000 series DVR. The minimum requirements for this installation are as
follows:
•
CPU: SPEED SHOULD BE 1.0GHZ or more
•
RAM: 256 MB RAM or more
•
Operating System: Windows 98/ 2000/ XP
•
Video card (stand alone): 32 MB
•
Hard Disk:10 MB (free space for software installation)
•
Network card: 10 base T
21.1
INTRODUCTION
The Network Viewer allows you to access the DVR from a remote desktop or laptop in a
TCP/IP networking environment. It can perform the following functions:
•
View live images from the 4CH.
•
Store, search, and review recorded video from the DVR HDD.
•
Change the record settings and date/time properties.
Note: Before you are ready to view images from a desktop, you need to have your DVR
CONNECTED TO THE LAN by obtaining a 10- base T Ethernet data cable (Standard RJ-
45)
RJ-45
DHT DVR
21.1.1
RJ-45 PIN CONFIGURATION FOR ETHERNET
PIN NO.
PIN Assignment
1.
TX +
2.
TX -
3.
RX +
4.
Not Connected
5.
Not Connected
6.
RX -
7.
Not Connected
8.
Not Connected
PC
40
RJ-45 socket
1 2 3 4 5 6 7 8
Advertisement
Table of Contents
