Lorex DXR43000 Series Instruction Manual page 52

22.3.2 AVI SAVING METHOD
PROCEDURE
Start the NETVIEWER application and press the SETUP BUTTON .
The SETUP window will come out (see Figure 7).
Figure 7: Netviewer Setup Window
From the SETUP menu, select the REC menu and the window will appear. The REC
menu is used to set the values to save the images displayed on the Viewer.
Note: If you choose the Encoding Codec, you can select the relevant Codec you
want to use. You could use any Codec out of the preinstalled Codec on your
computer. For an example of the selection window see Figure 8, page 49 (the
actual display could be different depending on your computer system)
48