Advertisement
Quick Links
Quick Installation Guide
16-Channel DVR Networkable with 120/160GB Hard Drive and 4/8/16
Cameras
DGR116888-S
DGR116882-S
DGR116841-S
The following steps will assist you in setting up your DVR, Cameras, and IP Video
Router:
STEP 1: Installing the Hard Drive ..................................................................................... 2
STEP 2: Connecting the Cameras .................................................................................... 4
STEP 3: Connecting the IP Video Router (L4202)............................................................ 4
STEP 5: Powering Up ....................................................................................................... 5
STEP 6: Setup your IP Video Router ................................................................................ 6
For additional setup and usage information, the following product manuals are
available for download from our website:
Product Manual
Product Manual
Product Manual
Product Manual
1
Advertisement
Related Manuals for Lorex DGR116888-S
Summary of Contents for Lorex DGR116888-S
-
Page 1: Quick Installation Guide
Quick Installation Guide 16-Channel DVR Networkable with 120/160GB Hard Drive and 4/8/16 Cameras DGR116888-S DGR116882-S DGR116841-S The following steps will assist you in setting up your DVR, Cameras, and IP Video Router: STEP 1: Installing the Hard Drive ..................2 STEP 2: Connecting the Cameras .................. - Page 2 STEP 1: Installing the Hard Drive NOTE: The HDD has the same purpose in a DGR116 as a video cassette does in a VCR. However, installing the HDD is a bit more complicated. Please follow the next steps carefully in order to ensure proper installation.
- Page 3 Step 5: Insert the HDD into the Cartridge Casing Take the Hard Disk Drive and connect the two cables from the back of the Cartridge Casing to the HDD. The cables should be pushed in firmly, but not forcibly. Step 6: Secure the HDD in the cartridge casing. Position the HDD into place and secure it using the six screws supplied.
- Page 4 STEP 2: Connecting the Cameras Connect all the Camera’s as shown in the diagram below, and then proceed to plug in the camera power supplies: 1. Connect the Extension Cable to the Camera by connecting the BNC (Yellow) and Power (black) cables NOTE: Make sure that the Extension Cable has been oriented correctly 2.
- Page 5 STEP 3: Connecting the IP Video Router (L4202) Connect your IP Video Router as shown in the diagram below, then proceed to plug in the Ethernet cable and power supply: STEP 4: Powering Up the DVR Press the power button located on the front of the DVR to turn the unit on. NOTE: At this point, it is highly recommended that you consult the Product Manual for the...
- Page 6 STEP 5: Setup your IP Video Router NOTE: At this point, it is highly recommended that you consult the Product Manual for the monitor to familiarize yourself with the menu options, system setup, recording settings and playback operations. NOTE: A PC is required for the initial setup of your IP Video Router. Please refer to the Frequently Asked Questions guide on our website for the answers to some of the most...