Table of Contents
Advertisement
Using the fader function
(1) When fading in [a]
In the standby mode, press FADER until the desired fader indicator flashes.
When fading out [b]
In the recording mode, press FADER until the desired fader indicator flashes.
The indicator changes as follows:
FADER
no indicator T
The last selected fader mode is indicated first of all.
(2) Press START/STOP. The fader indicator stops flashing.
After fade in/out ends, your camcorder automatically returns to the normal
mode.
To cancel the fader function
Before pressing START/STOP, press FADER repeatedly until the indicator disappears.
Notes
•The overlap, wipe and dot functions work only for tapes recorded in the Digital8
system.
•You cannot use the following functions while using the fader function. Also, you
cannot use the fader function while using the following functions:
– Digital effects
– Color Slow Shutter
– Super NightShot
– Photo recording
– Interval recording
– Frame recording
When you select OVERLAP, WIPE, or DOT
Your camcorder automatically stores the picture recorded on tape. While the picture is
being stored, the indicators flash fast, and the picture from the tape appears on the
screen. At this stage, the picture may not be recorded clearly, depending on the tape
condition.
t M.FADER t BOUNCE t MONOTONE
DOT
T
WIPE
T OVERLAP
1
FADER
FADER
45
Advertisement
Table of Contents
