Table of Contents
Advertisement
Recording still images on "Memory Stick"s
– Memory Photo recording
Recording images continuously
You can record still images continuously. Select one of the three modes described below
before recording.
NORMAL [a] (DCR-TRV740/TRV840 only)
Your camcorder shoots up to four still images in 1152 × 864 size or 13 still images in 640
× 480 size at about 0.5 sec intervals. (
EXP BRKTG (Recording image size is 640 × 480) (DCR-TRV740/TRV840 only)
Your camcorder automatically shoots three images at about 0.5 sec intervals at different
exposure. (
MULTI SCRN (Recording image size is 640 × 480) [b]
Your camcorder shoots nine still images at about 0.4 sec intervals and displays the
images on a single page divided into nine boxes. (
[a]
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
(2) Press MENU to display the menu settings.
(3) Turn the SEL/PUSH EXEC dial to select STILL SET in
(4) Turn the SEL/PUSH EXEC dial to select BURST (DCR-TRV740/TRV840 only)
(5) Turn the SEL/PUSH EXEC dial to select the desired setting, then press the
(6) Press MENU to make the menu settings disappear.
(7) Press PHOTO deeper.
126
)
the left (unlock) position.
/PIC MODE (DCR-TRV340 only), then press the dial.
dial.
)
)
[b]
, then press the dial.
Advertisement
Table of Contents
