Changing the menu settings
Icon/item
1)
STILL SET
BURST
(DCR-
TRV740/
TRV840 only)
PIC MODE
(DCR-TRV340
only)
QUALITY
FLD/FRAME
(DCR-TRV340
only)
IMAGESIZE
(DCR-TRV740
/TRV840 only)
MOVIE SET
IMAGESIZE
REMAIN
PRINT MARK
1)
Except DCR-TRV240
2)
For DCR-TRV740/TRV840, the default setting is SUPER FINE.
110
Mode
Meaning
z OFF
To not record continuously
NORMAL
To record continuously
EXP BRKTG
To record three images consecutively with
different exposures
MULTI SCRN
To record nine images continuously, display the
images on a single page divided into nine boxes.
z SINGLE
To not record continuously
MULTI SCRN
To record nine images continuously, display the
images on a single page divided into nine boxes.
2)
SUPER FINE
To record still images in the finest image quality
z
mode (p. 119)
(DCR-TRV740/
TRV840 only)
z
2)
FINE
To record still images in the fine image quality
mode (p. 119)
STANDARD
To record still images in the standard image
quality mode
z FIELD
To record moving subjects correcting jitter
(p. 124)
To record stopping subjects in high quality
FRAME
z 1152 × 864
To record still images in 1152 × 864 size (p. 121)
640 × 480
To record still images in 640 × 480 size
To record moving pictures at 320 × 240 size
z 320 × 240
(p. 121)
160 × 112
To record moving pictures at 160 × 112 size
z AUTO
To display the remaining capacity of the
"Memory Stick" in the following cases:
• For five seconds after inserting a "Memory
Stick" into your camcorder
• When the capacity of the "Memory Stick" is
less than one minute in MEMORY mode
• For five seconds after completing a moving
picture recording
ON
To always display the remaining capacity of the
"Memory Stick"
ON
To write a print mark on recorded still images
you want to print out later (p. 174)
z OFF
To cancel print marks on still images
POWER
switch
MEMORY
MEMORY
VCR
MEMORY
MEMORY
VCR
MEMORY
VCR
MEMORY
VCR
MEMORY
VCR
MEMORY