Table of Contents
Advertisement
Recording a picture
Self-timer recording
– Except DCR-TRV240
Recording with the self-timer starts in 10 seconds automatically.
You can also use the Remote Commander for this operation.
(1) In the standby mode, press MENU to display the menu settings.
(2) Turn the SEL/PUSH EXEC dial to select SELFTIMER in
dial.
(3) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(4) Press MENU to make the menu settings disappear.
(5) Press START/STOP.
The self-timer starts counting down from 10 with a beep. In the last two
seconds of the countdown, the beep gets faster, then recording starts
automatically.
To stop recording, press START/STOP again.
START/STOP
1,4
To stop the countdown
Press START/STOP.
To restart the countdown, press START/STOP again.
To cancel self-timer recording
Set SELFTIMER to OFF in the menu settings in the standby mode.
Note
The self-timer recording mode is automatically canceled when:
– Self-timer recording is finished.
– The POWER switch is set to OFF (CHG) or VCR.
When the POWER switch is set to MEMORY (except DCR-TRV240)
You can also record still images on "Memory Stick"s with the self-timer (p. 128).
5
START/STOP
MENU
, then press the
3
CAMERA SET
SELFTIMER
OFF
D ZOOM
ON
PHOTO REC
16 : 9WIDE
STEADYSHOT
FRAME REC
INT. REC
RETURN
[ MENU ] : END
31
Advertisement
Table of Contents
