Table of Contents
Advertisement
Superimposing a still image in the "Memory Stick" on an image
– MEMORY MIX
Recording superimposed images on a "Memory Stick" as a still
image
Before operation
Insert a "Memory Stick" is recorded still images into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
(2) Press MEMORY MIX.
(3) Press MEMORY+/– to select the still image you want to superimpose.
(4) Turn the SEL/PUSH EXEC dial to select the desired mode.
(5) Press the SEL/PUSH EXEC dial.
(6) Turn the SEL/PUSH EXEC dial to adjust the effect.
(7) Press PHOTO deeper to start recording.
132
the left (unlock) position.
The last recorded or last composed image appears on the lower part of the
screen as a thumbnail image.
To see the previous image, press MEMORY –. To see the next image, press
MEMORY+.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM
The still image is superimposed on the moving picture.
M. CHROM
– The color (blue) scheme of the area in the still image which is
to be swapped with a moving picture
M. LUMI
– The color (bright) scheme of the area in the still image which
is to be swapped with a moving picture
C. CHROM
– The color (blue) scheme of the area in the moving picture
which is to be swapped with a still image
The fewer bars there are on the screen, the stronger the effect becomes.
The image displayed on the screen will be recorded on a "Memory Stick."
Recording is complete when the bar scroll indicator disappears.
Advertisement
Table of Contents
