Connecting Camera Power - Lorex LW1001 Instruction Manual

4. Insert the Camera into the top slot of the stand.
5. Point the camera in the desired position. Tighten the side screw to
secure the camera to the Stand.
6. Adjust the angle of the camera for a desired view.
6

Connecting Camera Power

The Camera can be powered either by using the provided Power Adaptor, or using a 9v battery (not
included) and the Battery Adaptor Cable:
•
POWER ADAPTOR: Connect the Power Adaptor to the Camera.
•
BATTERY: Connect the battery adaptor cable to the camera. Connect a 9 Volt Battery to the
adaptor cable (NOTE: A new 9V Battery should last for approximately 4 hours without the IR
LEDs in use).
4
5
13