Lorex LW1200 Series Quick Start Manual

COLOR DIGITAL WIRELESS SURVEILLANCE SYSTEM
WITH INDOOR/OUTDOOR NIGHT VISION CAMERA
LW2100 SERIES - QUICk START GUIDE

Getting Started

The Digital Wireless Surveillance System
comes with the following components:
• Digital Wireless Color Camera*
• Camera* Stands
*
• Slim Wireless Receiver
• Wireless Antenna's for camera*
and receiver
• Power Adaptors* for camera* and
receiver
• Battery Adaptor Case for camera*
• RCA/BNC Adaptor
• RCA Audio/Video Cable*
• Instruction Manual
*Number of cameras may vary by model. Check your package for specific
content information.
B. Connect the Camera
Mount camera stand to
1
the wall
www.lorexcctv.com
LW2100 Series_QSG_EN_R1.indd 1
A. Connect the Receiver
Connect the included
1
Wireless Antenna to
the receiver
Connect the Wireless Antenna
2
to the camera.
Connect one end of the View your Camera images on any Observation
2 3
Monitor with standard BNC inputs or TV with
RCA Audio Video Cable
RCA inputs**.
to the Receiver.
Connect the Video end of the RCA Cable to the
1
Female end of the included RCA/BNC Adaptor.
Connect the BNC Adaptor to your Observation
System or DVR with standard BNC inputs.
Connect the Audio end of the RCA cable to the
Audio input on your Observation System or DVR.
To view camera images on your TV, connect the
2
RCA Video and Audio ends of the RCA Audio/
Video cable to the Video and Audio inputs on
your TV.
** Requires viewing/recording device with RCA Video or BNC Video
Secure Camera to the
3 4
Stand.
Connect power adapter to local 120V AC power outlet
under 15 minutes
Time Tools
utes*
Under 15 Min
* Installation time may vary based on
application and camera location
input. Viewing/Recording device sold separately.
NOTE: Before you install a camera, carefully plan
where and how it will be positioned, and where you
will route the cable that connects the camera to the
Connect one end of the Camera Power
power adaptor or battery adaptor. Before starting
Adaptor to the camera and the other
permanent installation, verify its performance by
end to an electrical outlet.
observing the image on a monitor when the camera
is positioned where it will be permanently installed.
NOTE: Wireless cameras require a power source
(either an electrical outlet or battery power) to
operate. If you plan to permanently mount the
camera in a location, it is recommended to use
the included Camera Power adaptor to prevent
interruptions in the image, as the battery adaptor is
intended for a temporary power solution.
NOTE: When adding cameras that were not included
in the original box, you will need to pair up the
camera with the receiver. Please refer to the Camera
Pairing Section of the User Manual.
LW2100 SERIES Series Quick Start Guide_R1
Router
under 30 minutes under 60 minutes over 60 minutes
Skill Level
Hand Tools Hardware
Hi Speed
Skills - Easy
Router
Plug & Play connections,
Hand Tools Intermediate
easy
On screen set up
Skill Level
easy Intermediate advanced
Page 1
5/6/2008 5:04:56 PM