NordicTrack C3 Si User Manual page 20

THE OPTIONAL CHEST PULSE SENSOR
The optional chest pulse sensor provides hands-free
operation and continuously monitors your heart rate
during your workouts. To purchase the optional
chest pulse sensor, see the front cover of this
manual.
INSTALLING THE RECEIVER FOR THE OPTIONAL
CHEST PULSE SENSOR
If you purchase the optional chest pulse sensor, follow
the steps below to install the receiver included with the
chest pulse sensor.
1. See assembly step 6 on page 8 and remove the
console from the upright.
2. Connect the wire on the receiver (A) to the wire in
the Console (4). Hold the receiver so that the
antenna is oriented as shown and is facing the
Console. Attach the receiver to the plastic posts
on the back of the Console with the two included
small screws.
Antenna
4
3. See assembly step 6 on page 8 and reattach the
console to the upright.
Note: Any other wires that are included with the
chest pulse sensor may be discarded.
20
Small
Screws
A
Wire
Posts