EVEREST_F8M7-10-09B_Edition1 Page253
Tuesday, February 10 2009 12:55 AM
5. Disconnect the bulb from the socket.
Rear direction indicator lights
Brake lights/Tail lights
Some models
6. Install the new bulb in the reverse order
of removal.
Brake lights/Tail lights (India), Reverse
lights
1. Turn the socket and bulb assembly
anticlockwise and remove it.
2. Disconnect the bulb from the socket.
Brake lights/Tail
lights
Reverse lights
Form No.F8M7-10-09B
Number plate lights
1. Turn the screws anticlockwise and
remove them.
2. Remove the lens and disconnect the
bulb.
3. Install the new bulb in the reverse order
of removal.
qReplacing Interior Light Bulbs
Overhead light, Map lights
1. Wrap a small flathead screwdriver with
a soft cloth to prevent damage to the
lens and remove the lens by carefully
prying on the edge of the lens with the
screwdriver.
2. Disconnect the bulb by pulling it out.
Some models
Black plate (253,1)
Maintenance and Care
Owner Maintenance
8-39