Ford EVEREST 2009 Manual page 114

EVEREST_F8M7-10-09B_Edition1 Page114
Tuesday, February 10 2009 12:54 AM
Driving Your Ford
Starting and Driving
qIndicator Lights
4×4 indicator light
This indicator light illuminates when 4×4
is fully engaged.
When this indicator light illuminates, the
vehicle is in 4×4.
The light turns off when the transfer shift
switch is in the 2H position.
CAUTION
If the 4×4 indicator and 4L indicator
lights are continuously lit regardless of
the position of the transfer shift switch,
this indicates that the transfer case
could be malfunctioning. Continuing to
drive under this condition could cause
damage to the transfer case. Consult an
expert repairer, we recommend an
Authorised Ford Repairer as soon as
possible.
4L indicator light
5-24
Form No.F8M7-10-09B
Black plate (114,1)
This indicator light illuminates when 4×4
low range is engaged.
The indicator light turns off when the
transfer shift switch is in a position other
than 4L.
The 4L indicator light flashes under the
following conditions:
4L is selected but not engaged
l
The vehicle speed has not dropped to
l
zero to allow 4L to engage.
The transmission has not been put in
l
neutral (N) to allow 4L to engage.
When the indicator light flashes, stop the
vehicle and shift into neutral (N).
Refer to Shifting Between 4×2/4×4 (page
5-25).
CAUTION
Do not continue driving in 4×4 when
l
the 4L indicator light is flashing
because you could damage
powertrain parts.
If the 4×4 indicator and 4L indicator
l
lights are continuously lit regardless
of the position of the transfer shift
switch, this indicates that the transfer
case could be malfunctioning.
Continuing to drive under this
condition could cause damage to the
transfer case. Consult an expert
repairer, we recommend an
Authorised Ford Repairer as soon as
possible.