Ford EVEREST 2009 Manual page 251

EVEREST_F8M7-10-09B_Edition1 Page251
Tuesday, February 10 2009 12:55 AM
7. Swing the retaining spring out and
away to free the bulb.
8. Carefully remove the bulb from the
socket by pulling it straight back.
9. Install the new bulb in the reverse order
of removal.
NOTE
To replace the bulb, contact an
l
expert repairer, we recommend an
Authorised Ford Repairer.
If the halogen bulb is accidentally
l
touched, it should be cleaned with
rubbing alcohol before being used.
Use the protective cover and carton
l
for the replacement bulb to dispose
of the old bulb promptly and out of
the reach of children.
í
Fog lights
1. Make sure the headlight switch is off.
2. Check the fog light position from
below the bumper.
3. Disconnect the socket from the
electrical connector by pressing the tab
on the connector with your finger.
Form No.F8M7-10-09B
Black plate (251,1)
Owner Maintenance
4. Turn the bulb anticlockwise and
remove it. Carefully remove the fog
light bulb from its socket by pulling it
straight back.
5. Install the new socket and bulb
assembly in the reverse order of
removal.
NOTE
To replace the bulb, contact an
l
expert repairer, we recommend an
Authorised Ford Repairer.
If the halogen bulb is accidentally
l
touched, it should be cleaned with
rubbing alcohol before being used.
Use the protective cover and carton
l
for the replacement bulb to dispose
of the old bulb promptly and out of
the reach of children.
í
Some models.
Maintenance and Care
8-37