Turn And Lane-Change Signals - Ford EVEREST 2009 Manual

EVEREST_F8M7-10-09B_Edition1 Page134
Tuesday, February 10 2009 12:54 AM
Driving Your Ford
Switches and Controls
qHeadlight Levelling
The number of occupants and weight of
cargo in the cargo bed change the angle of
the headlights.
The headlight levelling switch adjusts this
angle.
The following chart shows examples of proper
switch settings.
Driver Load
×
× ×
×: Yes
: No
NOTE
The higher the switch position
l
number, the lower the headlight
beam level.
Always keep the headlight beam at
l
the proper level, or your headlights
may blind other road users.
í
5-44
Some models.
Form No.F8M7-10-09B
í
Turn and Lane-Change
Signals
qDirection Indicator
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.
If the indicator light continues to flash
after a turn, manually return the lever to
its original position.
Switch position
0
2
Green indicators on the instrument panel
show which signal is working.
Lane-change signals
Move the lever slightly toward the
direction of the change
indicator flashes
will return to the off position when
released.
Black plate (134,1)
and hold it there. It
NOTE
If an indicator light stays on without
flashing or if it flashes abnormally, one
of the direction indicator bulbs may be
burned out.
Right turn
Right lane change
OFF
Left lane change
Left turn
until the