Use - Bosch AutoCook MUCC222WCN Instruction Manual

4. Press button B in order to access the
function selection mode.
5. Button B and the indicator [
(my recipe) light up. Button G flashes.
6. "00:00" is shown in the display. The
appliance is ready for use.
Note: If no input is made on the control
panel within 5 minutes, the appliance
automatically switches to standby mode.

Use

AutoCook recipes
For the best and tastiest results, we
recommend using the recipes from our
AutoCook app which was specially
developed for the AutoCook. The recipes
are constantly being further developed and
supplemented. The app features detailed
information on the required quantities
of ingredients, recommendations for the
preparation time and temperature, as well
as smart combinations of the preparation
programmes. To access the app, please
use the following URL or scan the QR code:
https://autocook-app.com
Please read the following table before
use to gain an overview of the different
preparation programmes as well as
recommended cooking times.
X "List of preparation programmes" see
page 28
X "Cooking times" see page 29
Some programmes consist of several
programme steps. The respective
programme step is shown in the display.
]
Once a step is finished, a recurring signal
tone sounds and the display and button
G flash. Add ingredients depending on
the recipe, and press button G again. The
following preparation step will start.
Depending on the programme selection
or the preparation step, the lid should be
closed or open. Please see the AutoCook
app for more details here.
Selecting and starting the
programme
Warning!
– Do not fill the pan beyond the marking
[4.0 litres]!
– Use only plastic utensils for stirring (do
not use metal utensils).
Important: Take note of the safety
instructions at the beginning of the manual.
X Image sequence E
1. Keep pressing button D until the
desired preparation programme is
selected. The corresponding LED
lights up in the control panel and the
pre-configured preparation time for
the selected preparation programme
flashes.
2. Press button E to change the pre-
configured preparation time. The display
changes from [
(longer) and then to [
before returning to [
The pre-configured preparation time is
shown in the display.
3. Open the lid and add the required
ingredients depending on the recipe.
4. Depending on the preparation
programme, close the lid.
5. Press button G to start the preparation
programme.
6. The appliance heats up the pan until the
target temperature is reached. During
the heating phase, lines that light up
in a clockwise direction appear in the
display.
Use
] (medium) to [
] (shorter)
] (medium).
en
]
23