Telephone - Skoda KAROQ 2020 Owner's Manual

Bluetooth® compatibility of mobile devices
Due to the large number of mobile devices, it is not
possible to guarantee total Bluetooth® compatibility
with Infotainment. Bluetooth® compatibility depends
on the Bluetooth® version as well as the implementa-
tion of Bluetooth® protocols by the manufacturer of
the mobile device.
Applications in mobile devices
Mobile devices can be used to install applications
that allow you to view additional information on the
Infotainment screen, or to operate the Infotainment
system.
Due to the variety of applications, as well as their on-
going development, the available applications may
not function on all mobile devices. ŠKODA AUTO as-
sumes no liability for their proper functioning.
The scope of available applications and their func-
tionality is dependent on the type of Infotainment, as
well as the vehicle and country.
Information about the ŠKODA applications
Detailed information on the ŠKODA applications can
be found on the website after reading the following
QR code or using the link.
http://go.skoda.eu/mobile-apps
Connection set-up
Connect a mobile device to Infotainment
›
Turn on the ignition.
›
Turn on the Bluetooth® on the mobile device.
›
Turn on the Infotainment Bluetooth®
Bluetooth .
›
Switch on Bluetooth® visibility of the Infotainment
Bluetooth Visibility: Visible. .
›
Find the Bluetooth® devices available in the mobile
device.
›
Select the Infotainment Bluetooth® unit.
The name of the unit can be found by tapping
Bluetooth Name: .
›
Confirm the PIN; enter it if necessary and then
confirm.
The mobile device is connected to the Infotainment
or just paired, depending on the number of devices
that are already connected.
Connect Infotainment to a non-paired mobile de-
vice
›
Turn on the ignition.
›
Turn on the Bluetooth® on the mobile device.
›
Turn on the Infotainment Bluetooth®
Bluetooth .
›
Bluetooth Tap Search devices .
›
Ensure the visibility of the device to be connected.
›
Select the desired device from the list of Blue-
tooth® devices.
›
Confirm the PIN; enter it if necessary and then
confirm.
›
If two devices are connected to the Infotainment,
select the device to be replaced.
Connect Infotainment to an already paired mobile
device
The connection with an already paired mobile device
is made automatically after switching on the ignition;
if necessary the device can be connected manually
as follows.
›
Turn on the ignition.
›
Turn on the Bluetooth® on the mobile device.
›
Turn on the Infotainment Bluetooth®
Bluetooth .
›
Bluetooth Paired devices .
›
In the device list, select the desired device and the
Bluetooth® profile.
›
Confirm the PIN; enter it if necessary and then
confirm.
›
If two devices are connected to the Infotainment,
select the device to be replaced.
Disconnect from a mobile device
›
Bluetooth Paired devices .
›
Tap the icon of the Bluetooth® profile of the de-
sired mobile device.
Delete a paired mobile device
›
Bluetooth Paired devices .
›
To delete one mobile device tap and confirm the
Bluetooth
deletion.
›
To delete all mobile devices tap Clear all and confirm
the deletion.

Telephone

Phone menu
Display menu
›
Tap .
If the menu Telephone is not displayed, check
whether the mobile device is connected.
Infotainment Swing › Telephone 79
Bluetooth
Bluetooth