The Administration Tab - Factory Defaults; The Administration Tab - Firmware Upgrade; Figure 6-35: Administration Tab - Factory Defaults; Figure 6-36: Administration Tab - Firmware Upgrade - Linksys WRT54G User Manual

Wireless-G Broadband Router

The Administration Tab - Factory Defaults

Click the Yes button to reset all configuration settings to their default values, and then click the Save Settings
button. Any settings you have saved will be lost when the default settings are restored. This feature is disabled by
default.

Figure 6-35: Administration Tab - Factory Defaults

The Administration Tab - Firmware Upgrade

Firmware can be upgraded by clicking the Upgrade button after browsing for the firmware, which you can
download from the Linksys website. Do not upgrade your firmware unless you are experiencing problems with
the Access Point. For more information about upgrading firmware, refer to "Appendix C: Upgrading Firmware".

Figure 6-36: Administration Tab - Firmware Upgrade

Chapter 6: Configuring the Wireless-G Broadband Router 34
The Administration Tab - Factory Defaults