SECO-LARM E-941S 600 Series Manual

!
CAUTION
The electromagnet lock requires a
face-to-face fitting as shown in figure
otherwise, the holding force will be
greatly decreased (direction of
hydraulic press pull must be collinear).
!
WARNING
Warnings indicate potentially hazardous
conditions, which if not avoided or corrected
may cause death or serious injury
Model
E-941SA-600
E-941SA-1200
E-941SB-600
E-941SB-1200
E-941SD-600
E-941SD-1200
Use only Hardware provided with these products for mounting. Door thickness should be 1
sex nut will be required. Door Header shall be minimum 2
for magnet, may need filler plates or angle bracket to mount magnet correctly.
Electromagnetic Lock
E-941Sx-600 / E-941Sx-1200
Manual
!
Cautions indicate potentially hazardous conditions, which if not
avoided or corrected, may cause minor or moderate injury.
Cautions may also warn against unsafe practices.
Holding Force
600-lb (272kg)
1,200-lb (545kg)
600-lb (272kg)
1,200-lb (545kg)
600-lb (272kg)
1,200-lb (545kg)
®
NOTICE
CAUTION
Material
Anodized Aluminum
Anodized Aluminum
Anodized Aluminum
Anodized Aluminum
Anodized Aluminum
Anodized Aluminum
3 / " thick and flat surface is needed to securely mount screws
4
Identification of: NFPA Standards 70 and 72
!
CAUTION
Remove any diode installed across the
magnetic lock for spike suppression.
The magnet is fitted with a metal oxide
varistor to prevent back EMF.
NOTICE
Notices indicates a condition that may cause
equipment or properly damage only.
Color
Aluminum
Aluminum
Black
Black
Dark Bronze
Dark Bronze
3 / " thick, otherwise different
4
5NR4