Warranty Introduction: The E-941SA-300RQ electromagnetic lock is the ideal way to secure a door against unauthorized entry. When power is applied to the electromagnetic lock, it creates an extremely strong magnetic field. The electromagnet is strongly attracted to the steel armature plate which is mounted on the secured door.
Use the diagram below to help decide whether or not an optional bracket will be necessary for installation. See page 7 for a complete list of SECO-LARM accessories. Typical Plate “L”...
SECO-LARM accessories such as “Z” brackets, “L” brackets, “U” brackets and/or spacer plates. Please see the diagram on page 3 to decide if a particular application requires any mounting accessories. See page 7 for a complete list of SECO-LARM accessories.
. After determining the correct location, install two screws through the mounting plate. Do not tighten. Adjust the mounting plate into the correct position. Double-check the position by holding the magnet there. Once satisfied with the position, tighten the two screws. See the diagrams below. Mounting Plate Long self-tapping screws Armature Plate SECO-LARM U.S.A., Inc.
Page 6
Connecting switching devices to the negative terminal may cause a delay in unlocking. NOTE: This should be the very last step, as once the tamper caps are in place they are very difficult to remove. SECO-LARM U.S.A., Inc.
LIFETIME LIMITED WARRANTY This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for the lifetime of the product. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. Under no circumstances will SECO- LARM be responsible for any costs or charges for removal, installation, or reinstallation.