Data Is Printed Diagonally; A Portion Of The Page Is Not Printed - Canon 5119B001AA Basic Operation Manual

Data Is Printed Diagonally

Try one of the following to solve the problem.
<Cause 1> Printed on curled paper.
Solution
<Cause 2> The positions of the paper guides does not fit to paper.
Solution
<Cause 3> Printing from the multi-purpose tray (manual feed slot)
Solution

A Portion of the Page Is Not Printed

Perform one of the following solutions according to the cause.
<Cause> A document with no margins was printed.
Solution 1
Solution 2
9-20
Flatten curls and print again.
Align the paper guides securely against the edges of the paper. If the paper guides are too loose or too tight, paper
is not fed properly.
Load paper in the paper cassette.
Data is printed with a margin of 1/4" (5 mm) (3/8" (10 mm) for envelopes). Provide a margin around the data.
"Printable Area" (→P.2-8)
Perform the following procedure in the printer driver.
1. Display the [Finishing] sheet.
2. Click [Advanced Setting].
3. Set [Expand Print Region and Print] to [Off ].