Placing Documents
Place documents on the platen glass. For information about the scannable area of a document, see
Unit(P. 191) .
Use documents that are completely dry
When placing documents, make sure that any glue, ink, or correction fluid on the documents has completely
dried.
1
Open the platen cover.
2
Place the document face down on the platen glass.
●
Align the corner of the document with the top-left corner of the platen glass.
To scan transparent documents (for example, tracing paper or transparencies), cover them with plain white
paper.
3
Gently close the platen cover.
●
The machine is ready to scan the document.
●
When scanning is complete, remove the document from the platen glass.
Basic Operations
19
3EEJ-008
Main