Using Windows Nt With A Parallel Cable - Lexmark C912 Setup Manual

Using Windows NT
with a parallel cable
Note:
USB support is not
available for Windows NT
operating systems.
Note:
You need
administrative access to
install printer drivers on your
computer.
Using Windows 95
with a parallel cable
Note:
USB support is not
available for Windows 95
operating systems.
11
Select Yes to print a test page, and then click Finish. All the
necessary files are installed on your computer.
12
After the test page prints, click Yes to close the message
window.
13
Click Finish to complete the installation. You are now ready to
print.
The easiest way to install a driver is to use the drivers CD that shipped
with your printer.
1
Insert the drivers CD.
2
Click Printer Software.
3
Click Agree to accept the license agreement.
4
Select Local Printer and click Next.
5
Make sure the correct printer and port are listed, and click OK.
You are now ready to print.
When the Update Device Driver Wizard screen appears:
1
Insert the drivers CD. If the CD auto launches, exit the CD.
If a system-compatible driver is found on your operating system,
the Wizard installs it.
If no compatible system driver is found on your operating
system, click Other Locations.
2
Browse to the location of the printer driver on the drivers CD,
and click OK.
D:\drivers\win_9x\english
3
Click Finish. The Add Printer Wizard screen appears.
4
Use the default printer name or type a unique name for your
printer, and then click Next.
5
Click Yes to print a test page.
6
Click Finish. A test page is sent to the printer once the driver
files are copied to your computer. You are now ready to print.
Install drivers for local printing
58