MSI MS-6132 Instruction Manual page 95

CHAPTER 4

Description of the item on screen follows:

Auto Configure EDO DRAM Timing

Choose Enabled(default) will automatically configure the DRAM

timing depending on the "DRAM Speed" selection. Choose disable to

customize setup.

EDO DRAM Speed (ns)

This option specifies the RAS access time (in nanoseconds) for the

DRAM used in the computer. The settings are 50,60 or 70. The Optimal

default setting is 60 and the Fail-Safe default setting is 70.

EDO DRAM Read Burst Timing

Choose DRAM read burst timing for the customize setup.

B stand for BEDO DRAM, E stand for EDO DRAM and F stand for FAST

PAGE DRAM.

EDO DRAM Write Burst Timing

Choose DRAM write burst timing for the customize setup.

EDO RAS Precharge Timing

This option defines the RAS# precharge requirements for the EDO

memory type in 66MHz clocks.

EDO RAS to CAS Delay

This operation decide the delay in assertion of CAS#(SCAS#) from

assertion of RAS#(SRAS#) in 66MHz.

MA Wait State

This option selects Fast or Slow MA bus timing. The Slow timing

is equal to Fast+1, in term of clock number for EDO DRAM.

SDRAM RAS to CAS Delay

This operation decide the delay in assertion of CAS#(SCAS#) from

assertion of RAS#(SRAS#) in 66MHz.

AMI

BIOS USER'S GUIDE

AMI

BIOS USER'S GUIDE

4-11